Features
Specifications
Options

The oversized hoop not only allows you to wrap larger bales, but also allows 3'x4'x6' bales to be wrapped stacked two high. This not only reduces time and labour but also decreases operating and wrap costs increasing profitability.

Twin Wrap Kit

Tubeline's Twin Wrap Kit holds two rolls of film and passes them through a single stretcher. This activates the wraps' bonding compound to form a strong 2-Ply layer of film that stands up to tough hay stalks and folds them over helping to prevent piercing of the wrap.

By combining two sets of two rolls for a total of four, Tubeline's twin wrap kit provides all the same protection as four separate stretchers with the additional benefit of producing a more durable bonded 2-Ply film that stands up better than four single ply layers.

Film Snap - Patent Pending

Standard on all inline Balewrapper models, Tubeline’s Film Snap easily cuts wrap with a single action. Press and hold the Film Snap plunger located beside the operator’s panel until both the tensioners pass, triggering the cutting action. The Film Snap bar snaps into action safely cutting the wrap without stopping the cycle.

3 Year Warranty

Inline wrappers carry a 3 Year Limited Warranty. For more information please contact Tubeline Manufacturing.

ECV Exclusive Features

Soft Start
Bale Counter (Lifetime)
Bale Counter (Resettable)
Bale Presets
Large Easy to Read Display
Remote Engine Start
Self-Diagnostics
Single Joystick Control to drive/steer

Other Standard Features

Main Control Panel Wired for Field Installed Options
Safety Shut Off Switch on Guards
Safety Shut Off Switch on Panel
Retractable Tongue
Folding Tongue
20HP Honda Engine with High Flow Pump
Low Oil Alert on Engine
Spark Arrestor on Engine
Hydraulic Manifold
Hydraulic Steering
Temperature Gauge on Hydraulic Tank
25L / 6.6 USG Fuel Tank with Fuel Pump
Limit Switches
Adjustable Stroke Length on Charge Table
Round to Square Bale Wrapper Conversion
Roller Bed Locking Lever
Electric over Hydraulic Controls
Fully Automatic Cycling
Automatically Idles Down When Cycle Completed
Drive Wheel
30" Pre-Tensioners
Wrap Carrier
Lock Pin (Hoop)
Roller Wheels
Push Ram
Push Ram Cylinders
Cross Tube Unloading (to push off last bale) Patented
King Pins with Tapered Bearings
Cam Brakes
Road Lights
Remote Steering and Shutdown Kit (std. on 6500)
Remote Engine Start (std. on 6500)
20HP Honda Engine Kit c/w High Flow Pump (Std. on 6500)

Specifications	TL 6500 AX2	TL 6500 ECV
Overall Length	25' 6"	25' 6"
Width	10' 8"	10' 8"
Height	10' 7"	10' 7"
Weight	7,950 lbs.	7,950 lbs.
Power	20Hp Honda with High Flow Pump	20Hp Honda with High Flow Pump
Electric Start	Standard	Standard
Alternator	18 Amp.	18 Amp.
Hydraulics	Self-contained	Self-contained
Controls	Electric over Hydraulic	Electric over Hydraulic
Tires	(4) 12.5 x 15 Highway Service	(4) 12.5 x 15 Highway Service
Tires with Power Drive	NA	NA
Quick Start Leveling	NA	NA
Brakes (Compactor)	Adjustable Cam Action	Adjustable Cam Action
Steering	Electric over Hydraulic	Electric over Hydraulic
Emergency Stop	E Stop Button	E Stop Button
Hydraulic Tail Gate	Standard	Standard
Transport Lights	Standard	Standard
Bale
Round	Up to 6'	Up to 6'
Square (Single)	4' x 4' x 6' and 3' x 3' x 7'	4' x 4' x 6' and 3' x 3' x 7'
Square (Double Stacked)	3' x 3' x 6' to 3' x 4' x 6'	3' x 3' x 6' to 3' x 4' x 6'
Film Stretcher	(2) 30" x 55%	(2) 30" x 55%
Bale Alignment	Adjustable Bale Guides	Adjustable Bale Guides
Bale Guide Rollers	Optional	Optional
Hoop Speed	Adj. Flow Control Valve	Adj. Flow Control Valve
Cycle Times*
5' Round (66" Cycle Length)	29 sec.	29 sec.
4' Round (54" Cycle Length)	23 sec.	23 sec.

* NOTE: BaleWrappers applying 8 layers - equipped with 20HP Engine, High flow pump, and Twin Wrap Kit.

Hydraulic Power Drive

Both the single and dual hydraulic power drives give your wrapper's drive system more power to get through tough to drive through areas.

Guide Rollers

The guides rollers are located on the tail of the wrapper to help guide the bales after being wrapped, reducing risk of damage.

Night Working Light Kit (Halogen)

The night working light kit extends your working hours to ensure you get all your wrapping done no matter when you start.

Night Working Light Kit (LED)

The night working light kit extends your working hours to ensure you get all your wrapping done no matter when you start.

Film Sensor

The film sensor automatically shuts down the wrapper hoop when it detects a break in the film, or when the wrapper runs out of wrap.

Film Sensor

This wireless film sensor exclusive for ECV models automatically shuts down the wrapper hoop when it detects a break in the film, or when the wrapper runs out of wrap.

Laser Guidance System

Optional on all LSV inline wrappers, the laser guidance system is designed to automatically guide the wrapper, spacing your bale rows consistently every time.