Print
- Features
- Specifications
- Options
Built with purpose, the TL5500 easily switches from round to square bales with a few quick adjustments. Raise the two table rails to give the bale proper clearance and raise the roller bed to ensure the proper discharge angle.
Pre-Tensioners
To create the 55% (approx.) stretch of the plastic, the pre-tensioners are knurled which allows them to grip and pull the plastic between the rollers activating the bonding agent in the film.
Film Snap - Patent Pending
Standard on all inline Balewrapper models, Tubeline’s Film Snap easily cuts wrap with a single action. Press and hold the Film Snap plunger located beside the operator’s panel until both the tensioners pass, triggering the cutting action. The Film Snap bar snaps into action safely cutting the wrap without stopping the cycle.
3 Year Warranty
Inline wrappers carry a 3 Year Limited Warranty. For more information please contact Tubeline Manufacturing.
ECV Exclusive Features
- Soft Start
- Bale Counter (Lifetime)
- Bale Counter (Resettable)
- Bale Presets
- Large Easy to Read Display
- Remote Engine Start
- Self-Diagnostics
- Single Joystick Control to drive/steer
Other Standard Features
- Main Control Panel Wired for Field Installed Options
- Safety Shut Off Switch on Guards
- Safety Shut Off Switch on Panel
- Retractable Tongue
- Folding Tongue
- Electric Start 13 HP Honda Gas Engine (18 Amp Charging System)
- Low Oil Alert on Engine
- Spark Arrestor on Engine
- Hydraulic Manifold
- Hydraulic Steering
- Temperature Gauge on Hydraulic Tank
- 25L / 6.6 USG Fuel Tank with Fuel Pump
- Limit Switches
- Adjustable Stroke Length on Charge Table
- Round to Square Bale Wrapper Conversion
- Square Bale Riser Kit to Accept 5'5" Long Bales
- Roller Bed Locking Lever
- Electric over Hydraulic Controls
- Fully Automatic Cycling
- Automatically Idles Down When Cycle Completed
- Drive Wheel
- Wrap Carrier
- Lock Pin (Hoop)
- Roller Wheels
- Push Ram
- Push Ram Cylinders
- Cross Tube Unloading (to push off last bale) Patented
- King Pins with Tapered Bearings
- Cam Brakes
- Road Lights
- Hydraulic Over Centre Brake to Pack Bales Tightly
- Hydraulic Lift Ramp
- Lug Tires on Rear Axle Only With Hyd. Power Drive
| Specifications | TL 5500 AX2 | TL 5500 ECV |
| Overall Length | 25' 6" | 25' 6" |
| Width | 9' | 9' |
| Height | 9' | 9' |
| Weight | 5,800 lbs. | 5,800 lbs. |
| Power | 13 Hp Honda | 13 Hp Honda |
| Electric Start | Standard | Standard |
| Alternator | 18 Amp. | 18 Amp. |
| Hydraulics | Self-contained | Self-contained |
| Controls | Electric over Hydraulic | Electric over Hydraulic |
| Tires | (4) 11L x 15 8 Ply | (4) 11L x 15 8 Ply |
| Tires with Power Drive | (2) 11L x 15 8 Ply (2) 27 x 10.5 Traction |
(2) 11L x 15 8 Ply (2) 27 x 10.5 Traction |
| Quick Start Leveling | Hyd. Lift Jack (Opt.) | Hyd. Lift Jack (Opt.) |
| Brakes (Compactor) | Adjustable Cam Action | Adjustable Cam Action |
| Steering | Electric over Hydraulic | Electric over Hydraulic |
| Emergency Stop | E Stop Button | E Stop Button |
| Hydraulic Tail Gate | Standard | Standard |
| Transport Lights | Standard | Standard |
| Bale | ||
| Round | Up to 5' 6" | Up to 5' 6" |
| Square (Single) | Up to 3' x 3' x 5' 6" | Up to 3' x 3' x 5' 6" |
| Square (Double Stacked) | NA | NA |
| Film Stretcher | (2) 30" x 55% | (2) 30" x 55% |
| Bale Alignment | Adjustable | Adjustable |
| Bale Guide Rollers | Optional | Optional |
| Hoop Speed | Adj. Flow Control Valve | Adj. Flow Control Valve |
| Cycle Times* | ||
| 5' Round (66" Cycle Length) | 29 sec. | 29 sec. |
| 4' Round (54" Cycle Length) | 23 sec. | 23 sec. |
* NOTE: BaleWrappers applying 8 layers - equipped with 20HP Engine, High flow pump, and Twin Wrap Kit.
20HP Honda Engine
Honda Engines power the fluid through the hydraulic system ensuring efficient flow from the reservoir to valve body. The 20HP engine comes with a high flow pump providing an ample supply of fluid to the valve body.
Remote Steering and Shutdown Kit
This rugged remote allows you to start, shut down, and control your wrapper remotely.
Remote Engine Start
This switch, located on the control panel, toggles between the engine starting with the key directly, or by using the remote.
Hydraulic Power Drive
Both the single and dual hydraulic power drives give your wrapper's drive system more power to get through tough to drive through areas.
Guide Rollers
The guides rollers are located on the tail of the wrapper to help guide the bales after being wrapped, reducing risk of damage.
Night Working Light Kit (Halogen)
The night working light kit extends your working hours to ensure you get all your wrapping done no matter when you start.
Night Working Light Kit (LED)
The night working light kit extends your working hours to ensure you get all your wrapping done no matter when you start.
Quick Start Power Jack
A level roller bed secures the first bale for a tightly packed start to your row.
Film Sensor
The film sensor automatically shuts down the wrapper hoop when it detects a break in the film, or when the wrapper runs out of wrap.
Film Sensor
This wireless film sensor exclusive for ECV models automatically shuts down the wrapper hoop when it detects a break in the film, or when the wrapper runs out of wrap.
Twin Wrap Kit
Tubeline's Twin Wrap Kit holds two rolls of film and passes them through a single stretcher. This activates the wraps' bonding compound to form a strong 2-Ply layer of film that stands up to tough hay stalks and folds them over helping to prevent piercing of the wrap.
By combining two sets of two rolls for a total of four, Tubeline's twin wrap kit provides all the same protection as four separate stretchers with the additional benefit of producing a more durable bonded 2-Ply film that stands up better than four single ply layers.
Laser Guidance System
Optional on all LSV inline wrappers, the laser guidance system is designed to automatically guide the wrapper, spacing your bale rows consistently every time.
1-888-856-6613 / 519-669-9488
519-669-5808
