<acronym id="faq8h"><label id="faq8h"></label></acronym><p id="faq8h"></p>

    <table id="faq8h"><ruby id="faq8h"></ruby></table>

  1. <big id="faq8h"><strike id="faq8h"><tt id="faq8h"></tt></strike></big>

      1. Nitro 575 R S Header Image

        Responding to market demand the NITRO Rancher Series was developed to ensure smaller operations get the same metering in a format tailored to them. NITRO RS spreaders are ideal for farmers trying to keep their yards clean while delivering rich nutrients to the field. Removeable beater assemblies provide increased value and functionality, allowing the NITRO to operate as a rear discharge trailer with a live floor when not spreading.

        Apron Chain Warranty Feature Image

        Apron Chain Limited Lifetime Warranty

        Under the Apron Chain Limited Lifetime Warranty, Tubeline will replace a broken apron chain or connecting link on any Nitro model manure spreader. Restrictions may apply. For more information, please contact the Tubeline office.

        C V Shaft Feature Image

        CV Shaft

        All Nitro models come equipped with a CV (Constant Velocity) Shaft allowing for a tighter turning radius, greatly reducing the incidence of driveline chatter in a tight turn, and increasing the longevity of the driveline.

        Guillotine Endgate Feature Image

        Guillotine Endgate

        The guillotine endgate can be opened partially to meter the amount of material being delivered to the beater assembly. This ensures the optimal delivery of lime and various manure consistencies to the field.

        Other Standard Features

        • Hydraulic-Driven Apron Chain
        • Standard Rubber Seal Kit (Endgate & Front Panel)
        • Apron Chain
        • Galvanized Slats
        • Quick Drop Beaters
        • Replaceable Reversible Knives
        • Robust and Dynamically Balanced
        • Beater Wedge
        • Driveline Protection
        • Industrial Jack
        • CV Shaft
        • High Load Bearings
        Capacities determined by ASAE Std S324.2
        Carrying Capacity 16 Ton
        Heaped (cu. ft.) 576
        Struck Level (cu. ft.) 379
        Inside Dimensions
         (Inside width between flare 102.5")
        62.5"W x 45.5"D x 218"L
        Overall Length 27.5'
        Overall Outside Width (Single/Tandem Axle) 131"/116"
        Loading Height (Single/Tandem Axle) 88.5"/80"
        Wheel Hub Capacity (Tandem Axle) 12,000lbs (8-bolt) x4
        Wheel Hub Capacity (Tandem Axle) 12,000lbs (8-bolt) x4
        Single Tire Sizes 710/70-38
        Tandem Tire Sizes 425/22.5 Recap Truck Tires or
        550/45-22.5 Floatation Tires or
        700/50-26.5 Floatation Tires
        Beater Diameter 34"
        Beater Speed 420 RPM
        PTO Speed 1000 RPM
        Apron Chain Link Dia. 5/8"
        Shipping Weight 11,000lbs.
        Required Tractor PTO HP 125
        Brakes Available Yes (Can Be Field Installed)
        * Note: Specifications subject to change without notice.
        Paddle Kit Feature Image

        Paddle Kit

        The optional bolt on paddle kit cups material to provide better throw.

        Spinner Deck Feature Image

        Spinner Deck

        For better management and spreading performance of poultry litter, Nitro spreaders can be equipped with an optional spinner deck. The interchangeable quick-drop beater system allows operators to conveniently switch between the vertical or spinner deck beater assemblies offering flexibility to both producers and custom operators.

        L E D Lights Feature Image

        LED Lights

        LED lights and flashers ensure transit safety. Innovative light covers mechanically open and close in sequence with the end gate, ensuring lights are protected while spreading.

        Optional Colours Feature Image

        Optional Colours

        In addition to the standard yellow, the Nitro lineup is available in red, green, blue and orange.

        Rubber Seal Kit Feature Image

        Enhanced Rubber Seal Kit

        The Enhanced Rubber Seal Kit adds a U-shape compression seal to the front panel and the endgate to help contain semi solid materials.

        Oscillating Ball Hitch Feature Image

        Oscillating Ball Hitch

        Optional on all models is the oscillating ball hitch available in various pin sizes.

        Brakes Feature Image


        When equipped with a brake system, all Nitro spreaders come with two calipers per side for a total of four. Hydraulically operated, these calipers provide the necessary clamping force to keep even our monstrous Nitro 950 in line.
        Single axle shown. Braking configurations may vary with model. Check model specifications for brake availability.

        Errors and omissions excepted. Specifications and images on this page are subject to change without notice. For current information on all of our products, please contact Tubeline Manufacturing.